As you are producing the products your firm is known for, it is important that they not only work but they also look good. There are many processes that are involved in the manufacturing of these items and one of them has to ensure the surface is colorful. That is where the painting or, more recently, the powder coating Statesville NC firms offer to give those items a nicer look come in.
Each part of the component you are producing will need to be coated to protect them from the elements or to make them nicer to look at. The spot welds, the sanding and all other processes will often leave a surface that is not attractive. Painting can accomplish this, however, this coat will often chip or crack and flake off. The coatings that are applied through powder processing will not.
Most of the items seen today have this type of protective coat on them. Computer cases and appliances are just a couple of these. Large refrigerated cases are on this list as well as many plumbing parts that must be protected from a lot of contamination on a constant basis. Looking good is just one of the several reasons for this coating.
When setting up a traditional painting system, a lot of space must be utilized. The area must have systems for cleaning, laying or hanging the parts to be painted. This all must be dust free. The drying area is used, sometimes for hours at a time, to ensure the complete curing of the paint. This is a lot of space to be devoted to this.
For a powder coating process, not as much room will be needed. It can be set up easily and the oven can be located in the same area. Most smaller firms do, however, farm this work out as it is easier to concentrate on the manufacturing of the components and not worry about the coating. Larger firms may have these areas set up for this work.
Processing these parts through this area looks as simple as any other process. The parts are cleaned and hung on hooks, after being connected to a positive electrical charge through the use of a small clamp. The negative charge of the powder will help the sprayed on substance to hold onto the part. The oven will finish the whole process.
The oven will be heated to between 200 and about 400 degrees based on the material being heated and the make up of the resins and pigments being used. Just a very few minutes will be needed to bond this powder to itself and the metal underneath. It will melt and flow into all of the recesses present and cover most of all but the largest imperfections.
The powder coating other firms use to project a professional appearance can be yours as well. Setting this up in your plant or having a company who offers this pick it up will make all of your products shine as they await purchase. This process will level the playing field between large and small producers of world class items in the eyes of the customer.
Each part of the component you are producing will need to be coated to protect them from the elements or to make them nicer to look at. The spot welds, the sanding and all other processes will often leave a surface that is not attractive. Painting can accomplish this, however, this coat will often chip or crack and flake off. The coatings that are applied through powder processing will not.
Most of the items seen today have this type of protective coat on them. Computer cases and appliances are just a couple of these. Large refrigerated cases are on this list as well as many plumbing parts that must be protected from a lot of contamination on a constant basis. Looking good is just one of the several reasons for this coating.
When setting up a traditional painting system, a lot of space must be utilized. The area must have systems for cleaning, laying or hanging the parts to be painted. This all must be dust free. The drying area is used, sometimes for hours at a time, to ensure the complete curing of the paint. This is a lot of space to be devoted to this.
For a powder coating process, not as much room will be needed. It can be set up easily and the oven can be located in the same area. Most smaller firms do, however, farm this work out as it is easier to concentrate on the manufacturing of the components and not worry about the coating. Larger firms may have these areas set up for this work.
Processing these parts through this area looks as simple as any other process. The parts are cleaned and hung on hooks, after being connected to a positive electrical charge through the use of a small clamp. The negative charge of the powder will help the sprayed on substance to hold onto the part. The oven will finish the whole process.
The oven will be heated to between 200 and about 400 degrees based on the material being heated and the make up of the resins and pigments being used. Just a very few minutes will be needed to bond this powder to itself and the metal underneath. It will melt and flow into all of the recesses present and cover most of all but the largest imperfections.
The powder coating other firms use to project a professional appearance can be yours as well. Setting this up in your plant or having a company who offers this pick it up will make all of your products shine as they await purchase. This process will level the playing field between large and small producers of world class items in the eyes of the customer.
About the Author:
Get a review of the benefits of using the services of a powder coating Statesville NC company and more information about a reputable company at http://www.diversifiedfinishers.com now.