If you own a left hand drive car and you are moving abroad you may wish to make some changes to the vehicle. In a lot of countries the cars will drive on the right and modifying yours will make things a little easier. If you a looking for a challenger rhd conversion there are a couple of options available to you and some care is needed.
A fair amount of mechanical work is required to make the car operate as a right hand drive model. The basic controls such as the pedals and steering wheel will need relocating along with some interior switches and mirrors. The headlamp aim will need adjusting and there will be some work required on the brakes, exhaust and suspension to allow the car to be driven safely on the roads.
There are two ways to get the modification work done and you should think about which one is better for you. The car can be given to a specialist conversion firm and they will carry out all of the modifications for you. The other option is to purchase a conversion kit and carry out the mechanical work as a home project.
Giving your vehicle to an engineering company is the better option for a few good reasons. The work will be done to a very high standard and when it is finished the car will look as though it was originally a RHD model. The work that is done will also be covered by a warranty and the company will continue to look after your car in the future.
Locating a conversion company is fairly easy and you should contact a few different ones to obtain a quote for the job. You will find many companies in car magazines and other adverts and they are listed online. Some of the web sites for the conversion specialists are worth reading as they will have some very useful information which you may find helpful.
If you want to do the work as a home project you will need to contact an auto store and buy a kit. Many stores will have a kit in stock or they will order one and you can also buy them online from a large number of retailers. The kit will be sent to your address with full fitting instructions and you may need to purchase some additional tools and equipment.
Using a kit is the least costly method of converting your challenger and the vehicle will be fully functional but there are some things to be aware of. The end results are going to be a little unsightly and many mechanical parts will be on show. Springs, chains, levers and bolts are going to be left exposed and are visible to the driver and passengers inside the vehicle.
When you make any major changes to your challenger there are a few things that you should be aware of. The future value of the vehicle may be affected and if it is still under a Dodge warranty it will become void. You will also have to inform the company that provides your car insurance and it may cost you more to insure it in the future.
A fair amount of mechanical work is required to make the car operate as a right hand drive model. The basic controls such as the pedals and steering wheel will need relocating along with some interior switches and mirrors. The headlamp aim will need adjusting and there will be some work required on the brakes, exhaust and suspension to allow the car to be driven safely on the roads.
There are two ways to get the modification work done and you should think about which one is better for you. The car can be given to a specialist conversion firm and they will carry out all of the modifications for you. The other option is to purchase a conversion kit and carry out the mechanical work as a home project.
Giving your vehicle to an engineering company is the better option for a few good reasons. The work will be done to a very high standard and when it is finished the car will look as though it was originally a RHD model. The work that is done will also be covered by a warranty and the company will continue to look after your car in the future.
Locating a conversion company is fairly easy and you should contact a few different ones to obtain a quote for the job. You will find many companies in car magazines and other adverts and they are listed online. Some of the web sites for the conversion specialists are worth reading as they will have some very useful information which you may find helpful.
If you want to do the work as a home project you will need to contact an auto store and buy a kit. Many stores will have a kit in stock or they will order one and you can also buy them online from a large number of retailers. The kit will be sent to your address with full fitting instructions and you may need to purchase some additional tools and equipment.
Using a kit is the least costly method of converting your challenger and the vehicle will be fully functional but there are some things to be aware of. The end results are going to be a little unsightly and many mechanical parts will be on show. Springs, chains, levers and bolts are going to be left exposed and are visible to the driver and passengers inside the vehicle.
When you make any major changes to your challenger there are a few things that you should be aware of. The future value of the vehicle may be affected and if it is still under a Dodge warranty it will become void. You will also have to inform the company that provides your car insurance and it may cost you more to insure it in the future.
About the Author:
Find a list of the reasons why you should use Challenger RHD conversion services and more info about a reputable service provider at http://www.uswd.com now.
No comments:
Post a Comment